|Oscillation frequency:||0–60 Hz|
|Oscillation stroke:||+/-0.25 – +/-1.0mm|
|Band feed:||30–150 mm/min|
|Compressed air:||max: 0.8 MPa|
|Weight (kg):||12 kg|
|Contact stroke:||10 mm|
|Contact roll widths:||15 mm to 50 mm|
|Machining diameter:||mind. 280 mm|
|Roll hardness:||35°, 50°, 65°, 80°|
|Contact pressure max:||270 Notches|
|Operating voltage:||24V DC|
|Degree of protection:||IP67|
The RF300 pipe finishing unit from techno-finish Industries GmbH has a very compact design and is also suitable for internal surfaces with a diameter of 250 mm or more, and thanks to its IP67 protection class is also very suitable for wet processing.
The device can be easily installed in CNC machines and other large systems without any additional effort.
Our RF300, like the other models, is constructed with standard commercial elements and can easily be adapted to your special requirements. The tube processing unit also offers you a high degree of flexibility and economy when using custom-made products.
Very compact belt finisher for the inenfinishing of pipes with belt measuring system for installation in grinding and turning machines. Tube finisher for use in adverse conditions with protection class IP67.
All control elements of the tube finisher are located in the special control cabinet. The control cabinet, which has been extended by the pneumatics, is controlled and monitored via a Siemens control (bus-capable). Thanks to the bus system, the devices are also particularly suitable for installation in CNC machines and large systems.
The new belt measuring system increases process reliability and reduces belt consumption.
All parameters are entered and monitored via the screen. All error messages are displayed on the Siemens touch panel as plain text messages or sent to the higher-level control.
All parameters are digitally entered and monitored.
All pneumatic settings are made directly on the control cabinet.
techno-finish Industries GmbH
Monday – Friday
08:00 – 12:00 a.m.
01:30 – 05:00 p.m.