|Oscillation Frequency:||0–60 Hz|
|Oscillation Stroke:||+/-0.25 – +/-2.5 mm|
|Belt Feed:||20 – 120 mm/min|
|Compressed Air:||max: 0.8 MPa|
|Contact Stroke:||40 mm|
|Contact Roll Widths:||10 mm to 80 mm|
|Machining diameter:||mind. 280 mm|
|Roll hardness:||35°, 50°, 65°, 80°|
|Contact pressure max:||270 N|
|Operating voltage:||1 x 230 V / 50 Hz|
|Control cabinet:||Siemens Touch-Panel|
The tape finisher devices, such as the G2-50 model from techno-finish Industries GmbH, are constructed with standard commercial elements. This allows us to easily meet size-specific requirements and implement special solutions on customer request.
The G2-50 model also offers high flexibility and economy in the use of one-off productions. Whether rotogravure rollers, foil rollers, rubber rollers, copying rollers, valve levers but also for smaller components.
An optimum surface of various machine components is becoming increasingly important. Super finishing offers you the best competitive advantage. This type of surface treatment optimizes the roughness and waviness of various components and thus reduces wear.
For you as a supplier and/or manufacturer in the fields of pneumatics, hydraulics, automotive engineering, vacuum technology and many more, it is interesting because 90% of global companies prefer this method.
By monitoring interfaces, precise evaluations are possible and can also be subsequently used for automated production lines.
Compact belt finishing device with belt measuring system for installation in eco-line machines, for single part processing up to mass production.
The belt finishing device G2 is controlled and monitored by a Siemens control (bus-capable). Thanks to the bus system, the units are also particularly suitable for installation in CNC machines and large systems.
The new belt measuring system increases process reliability and reduces belt consumption.
All parameters are entered and monitored via the screen. All error messages are displayed on the Siemens Touch as plain text messages.
All parameters are digitally entered and monitored.
All pneumatic settings are made directly on the control cabinet.
techno-finish Industries GmbH
Monday – Friday
08:00 – 12:00 a.m.
01:30 – 05:00 p.m.